• Heating / Drying

    Gerhardt EV Range

    These compact powerful heaters can be used for a wide variety of applications. Available as individual heaters or 4 or 6 place units. The powder coated steel frame has pre-formed holes for the insertion of a support rods.

    The 85mm diameter top plates can be extended by the addition of an interchangeable 120mm diameter aluminium top plate. The larger top plate can accommodate bottles, flat bottom flasks or beakers up to 2 litres.

    Round-bottomed flasks up to 750ml can also be accommodated by the addition of aluminium flask holders and air bath inserts.

    Gerhardt KI Heating Mantle range

    These powerful heaters each have power / heat control and excess current switch and can be used for fast heating of round bottomed flasks. The powder coated steel frame has a preformed holes for the insertion of a support rods.

    The curved tubular heating element can hold flasks from 50 - 250ml or 250ml to 100ml depending on the model required. For heating by convection air bath inserts may be used.

    Heating mantles are available as individual heaters or 4 or 6 place units.

    STL 56 Glassware Dryer

    The rapid dryer for laboratory glassware uses filtered air through the revolving upper part. It consists of a central main pipe with 24 large pipes of 16 mm Ø and 32 small pipes of 11 mm Ø. The water running out of the glassware is collected in the bottom tray. It is then directed via an outlet pipe into a suitable drain.